Instruments available now

Compact 48×48 panel ammeter for control and distribution boards.

Moving-iron 96×96 panel ammeter for switchgear current indication.

Analogue insulation resistance tester for field megger testing.

Portable standard bench meter for precise DC current reference measurement.

Portable standard bench meter for precise DC voltage reference measurement.

Portable standard bench meter for precise DC microampere reference measurement.

Range 0-2000 µS, complete with sensor K-0.1, 0.01 µS resolution.

Stainless-steel dial contact thermometer with capillary sensor for process temperature.

Includes 2x6mm blade, for coatings up to 120 microns, complete set in carrying case.

Configurable range 0–2000 mBar, interchangeable sensor, thermocouple K input for compensation, dual 4-20 mA / 0-10 V outputs, RS232, ALU IP65 housing.

Line size 2", complete with supply.

Line size 3/4", complete with supply.

16.5 meter range digital measuring tape with Bluetooth.

Range 76–757 LPM, 1" connection, rate of flow with 2 totalizers, battery operated, aluminium construction.

Range 0-10,000 lux, battery operated.

Handheld M1000 digital manometer and calibrator for pressure measurement up to 100 psi.

Handheld digital manometer and calibrator for pressure measurement up to 5000 psi.

Auto-ranging digital multimeter for general electrical measurement work.

Digital LED panel ammeter for accurate current display in electrical panels.

Digital LED panel meter for kilowatt indication in switchgear and control panels.

Digital LED panel voltmeter with programmable display for panel installations.

Measures air velocity (max/average), temperature, wind chill, altitude and pressure trend; range 0.3–40 m/s; portable vane type, battery operated, backlit display.

Handheld pneumatic pressure calibrator with simultaneous pressure and mA readout.

Ball assembly, 0-340 poise direct reading rotor, for paint viscosity testing.

Range -20°C to 400°C, accuracy 0.1°C, single input.

Three-phase power meter with clamp sensors for load and energy analysis.

Single-phase transformer turns ratio test set for winding checks.

For pipe sizes 1/2 mm to 100 mm and 4–24", stainless steel measuring transducer, accuracy ±1%, wall mounting.

12" size digital vernier caliper with Bluetooth output.

Range 0.01-20", portable, battery operated, complete with sensor, connecting cable and operating manual in soft carrying case.

Range 0-100 mm, battery operated.

Single-phase direct reading kilowatt-hour meter for energy measurement.

Handheld electronic leak detector with flexible probe for refrigerant and gas leaks.

Graphical MultiScope multimeter combining DMM measurement with waveform display.

Handheld digital multimeter for voltage, current, resistance and continuity testing.

Analogue 96×96 panel frequency meter for switchboard monitoring.

Vibrating reed frequency meter for 45–55 Hz supply monitoring.

38-piece gauge block set, Grade B, in fitted wooden case.

High-voltage detector stick, range 1-40 kV, with neon and buzzer indication.

Insulation resistance tester with multimeter functions and wire tracing set.

Battery tester simulating full discharge tests on 12 V SLA and car batteries in seconds.

96×96 panel kilowatt meter for active power indication.

Compact AC clamp meter for current, voltage and resistance measurement.

Liquid-column manometer for accurate differential pressure measurement in air systems.

Wall-mounted liquid-column manometer for ventilation and duct pressure readings.

Portable moving-iron AC/DC amperemeter for calibration and reference measurement.

Portable moving-iron AC/DC voltmeter for calibration and reference measurement.

Range 0-50 cSt, operating temperature 0-200°C.

Digital LED panel thermometer for equipment and enclosure temperature display.

Benchtop peak ampere meter for laboratory and workshop current measurement.

Range 0-25 mm.

For air flow measurement, used together with a differential pressure transmitter.

Compact inclined liquid-column manometer for low differential pressure checks.

Compact current transformer for portable measurement and metering applications.

HTP1 hydraulic hand pump generating pressures to 10,000 psi for on-site gauge calibration.

Hydraulic hand pump with reference gauge and hose for high-pressure gauge calibration.

Remote hygrometry/temperature probe, 2m cable, 5-95% RH, -10°C to +50°C, 2-line display with hold/min/max functions.

Capacitor bank panel for power factor correction on industrial supplies.

Reference-grade RTD thermometer readout for precise temperature calibration work.

Precision absolute pressure indicator reading in inches of mercury for reference calibration.

Supply pressure 35 bar, outlet pressure 6–9.5 bar.

Crocodile clip type safety clamp rated up to 20 amp.

Crocodile clip type safety clamp, Model AK2B.

Flying leg type safety clamp for secure test connections.

Portable colour ScopeMeter combining oscilloscope and multimeter for field service.

Direct reading range 200-18,000 RPM, 220 V / 50 Hz operative, complete in leather carrying case.

Range 0-0.4", resolution 0.001".

Length 1000mm, four 4mm banana plugs in red, black, blue and yellow.

Length 2000mm, four 4mm banana plugs in red, black, blue and yellow.

96×96 analogue panel voltmeter for industrial distribution boards.

96×96 analogue panel voltmeter for switchboard voltage indication.

12-channel chartless recorder, universal input (thermocouple, RTD, mV, V), 5.7" TFT colour display, panel mount 144×144 mm.

12-channel recorder, universal input (thermocouple, RTD, mV, V), panel mount 144×144 mm, 220 V / 50 Hz.